Loading ...
Loading ...
Loading ...
19
ENGLISH
If you want your laundry to be spun
or use temperature different from
the one proposed by the
washer-dryer, pess the Spin “ ”
and the temperature “ ” touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
Different functions can be
combined which is dependent on
the program selected.
If an option is not compatible with
the wash program selected, the
message “Not Available” will flash
on display along with buzzer sound.
If you want to adjust washing time,
press the “Time Manager ”
touchpad repeatedly to increase or
decrease washing time. See Time
Manager guide on page 15.
If you want to delay the start of the
washing program, press the “Delay
Start ” touchpad repeatedly to
choose your washer-dryer delay
time.
5.3 Options Setting
The appliance will automatically
adjust the selected program duration
according to the type and size of the
load.
-
-
The display will show adjusted
program duration.
-
To start a program, press the Start/Pause
touchpad. The corresponding pilot
light will stop flashing and a default
program duration will be displayed on the
screen.
5.4 Starting A Cycle “ ”
NOTE: After approx. 15 minutes
from the start of a program:
If you press any touchpad while a
program is operating, the message
“Not Available” will flash on display
along with buzzer sound. (except
“Start/Pause” touchpad and “On/Off”
button)
To pause, press Start/ Pause .
The indicator will start flashing.
-
Press the Start/Pause again.
The program will continue.
-
Changing a running program is possible
only by switching off the appliance.
Press the “On/Off” button to cancel
the program and to turn off the
appliance.
-
-
-
5.5 Interruption Of A Program
5.6 Changing A Program
It may be possible to change some of the
options after a wash program has started.
Press the “On/Off” button again to
start the appliance.
-
5.7 Changing The Options
Press the touchpad Start/Pause .
The indicator will start flashing.
1.
If available, change the options that
you wish.
2.
Press Start/Pause again. The
program will continue.
3.
1.
2.
While a program or the Delay Start is
operating, the appliance door is locked
and the display shows the indicator “ ”.
First, set the machine to PAUSE by
pressing the “Start/Pause ” touchpad.
Wait until the door lock indicator “ ”
goes off, then the door can be opened.
If the door lock indicator “ ” does not
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of emergency, please
refer to “Emergency door
opening” on page 33.
5.8 Opening The Door
NOTE
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
The appliance will not drain the
water (except programs; Refresh,
Spin, Rinse + Spin).
Loading ...
Loading ...
Loading ...