Loading ...
Loading ...
Loading ...
17
ENGLISH
Close the door.
6.
Make sure that no laundry
remains between the seal and
the door.
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase. This
activates the drain system.
1.
2.
3.
Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
DAILY USE - WASHING (Only)5.
Press the On/Off button to turn on the
washer-dryer. Touch one of the
Program Icons to choose the wash
program you require.
For correct operation of the load
sensor, activate the appliance and
set a wash program BEFORE
loading the laundry in the drum.
(see page 9)
Check and remove objects (if there
are any) that could be trapped in the
fold.
1.
2.
5.1 Loading The Laundry
Connect the main plug to the main
socket.
Turn the water tap on.
3.
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. (Refer to page 23
“WASHING & DRYING HINTS”)
5.
4.
During installation or before first use you
may observe some water in the machine.
This is a residual water left in the machine
after a full functional test in the factory to
ensure the machine is delivered to
customers in perfect working order and is
no cause for concern.
NOTE
Loading ...
Loading ...
Loading ...