Loading ...
Loading ...
Loading ...
330
10. During measurement, the measured value is displayed as -----:
This phenomenon is normal. When the channel waveform displays beyond the waveform display area, the
measured value is displayed as -----. If the channel vertical sensitivity or vertical position is adjusted, the
measured value can be displayed correctly;
This phenomenon is normal. When there is no full-cycle waveform in the waveform display area, the
measured value may be displayed as -----. If the time base is adjusted, the measured value will be displayed
correctly.
This phenomenon is normal, and the measured value of the FFT waveform is displayed as -----.
11. CSV files cannot be selected when loading reference:
CSV files are not the supported format that can be loaded into reference channels.
12. Tap the button during the use of oscilloscope, there is no beep sound:
Check whether the sound volume setting is correct.
13. Oscilloscope backlight has low brightness:
Loading ...
Loading ...
Loading ...