Loading ...
Loading ...
Loading ...
Chapter 7 Analysis System
151
Note:
If the waveform required for measurement is not fully displayed on the screen, “Forward Clipping” or “Negative
Clipping” is displayed at the position of the measured value.
When the math function is operated, if source channel waveform is fully displayed, and the math waveform appears
to be off the screen, the measured value of math waveform will not be influenced.
If source channel is clipped, the measured value of math waveform is the source channel value during screen wave
clipping.
7.2 Frequency Meter Measurement
Open the main menu, tap Measure and Counter to enter the hardware frequency meter setting menu, and select the
channel to be measured, as shown in Figure 7-8. The measured value is displayed in the upper left corner of the
screen, as shown in Figure 7-9.
Loading ...
Loading ...
Loading ...