Loading ...
Loading ...
Loading ...
2271A
Operators Manual
90
Error Codes
If an error occurs during Product operation or control, an error message is shown
on the display. Errors can be caused by:
• Incorrect control that uses the front panel, (for example, attempts to force a
prohibited mode or overloading of output terminals)
• Product fault.
These messages are shown in Table 19. All error messages are shown in a
frame that overlaps the main screen.
Table 19. Error Codes
Error ID
Error
Number
Error Message
ERR_DEVICE_NO_RESPONSE 900 Error 900: Device No Response
ERR_DEVICE_DISCONNECTED 901 Error 901: Device Disconnected
ERR_MESSAGE_TOO_LONG 902 Error 902: Message Too Long
ERR_MESSAGE_TOO_SHORT 903 Error 903: Message Too Short
ERR_URVLRV_OVERFLOW 904 Error 904: URV/LRV Overflow
ERR_LRV_TOO_LOW 905 Error 905: LRV Too Low
ERR_LRV_TOO_HIGH 906 Error 906: URV Too High
ERR_URV_TOO_LOW 907 Error 907: URV Too Low
ERR_URV_AND_LRV_OUTOF_LIMITS 908 Error 908: URV And LRV Out Of Limit
ERR_INVALID_LOOP_mA 909 Error 909: Invalid Loop Current
ERR_INVALID_UNIT 910 Error 910: Invalid Unit
ERR_INVALID_COMMAND 911 Error 911: Invalid Command
ERR_INVALID_ADDRESS 912 Error 912: Invalid Address
ERR_INVALID_SELECTION 913 Error 913: Invalid Selection
ERR_INVALID_FIXED_DATA 914 Error 914: Invalid Fixed Data
ERR_COMMAND_NOT_IMPLEMENTED 915 Error 915: Command Not Implemented
ERR_PV_OUTOF_LIMITS 916 Error 916: PV Out Of Limits
ERR_HART_WRITE_PROTECTED 917 Error 917: HART Write Protected
ERR_DEVICE_SPECIFIC_ERROR 918 Error 918: Device Specific Error
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...