Loading ...
Loading ...
Loading ...
2271A
Operators Manual
20
Table 6. Instrument Settings Menu (cont.)
Tab Description
Screen
Capture
The Product can save screen captures. When the Product is connected to a PC
using a USB cable, the Product shows as a disk drive on the PC. Screen captures
can be copied from the Product to the PC. To save a screen, push and hold .
Change
Password
A security password protects the integrity of Product calibration and must be
entered before new calibration constants can be saved to non-volatile memory.
The password also protects the ability to set the date for the internal real-time
clock. If the password has not been entered, the Product is secured.
Once the password is entered, the Product is unsecured. The Product secures
itself when it is reset or when the Setup menus are closed. The Product can be
unsecured at any time over the remote interface with the CAL_SECURE command
and by entering the password. The Product prompts for the password to unsecure
the Product before it can accept new values to be eventually secured. The
password contains 1 to 8 digits and is factory set to 2271.
To change the password:
1. Select
>Instrument Setup>Instrument Settings>Change Password.
The Product prompts for the current password.
2. Use the numeric keypad to enter the current password.
3. To change the password over the remote interface use the CAL_PASSWD
command.
Note
If the new password is lost, contact Fluke Calibration
Customer Service for a new password.
Clear All Files
This deletes all files saved in the internal mass storage disk.
Files include screen captures and report files created by the program of transmitter
or pressure device.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...