Loading ...
Loading ...
Loading ...
Automated Pressure Calibrator
Turn on the Product
13
Turn on the Product
To turn on the Product, toggle the main power switch, located on the left-rear of
the Product (when looking at it from the back) to I. When the Product is turned
on, it takes approximately 50 seconds to complete its power-up process and
cannot be used during this time.
Note
Push at any time to put the Product into Standby. When in
Standby, the Product stays powered on and keeps the internal
components warm but turns off the display and remote
communication.
For the Product to perform to specifications, a 15-minute warm-up period is
required after the Product is turned on or a new PMM is installed. Additional
ambient temperature acclimation can be required.
Main Screens
After the power-up process, the Product shows one of these Main screens,
depending on which mode the Product is in.
• Pressure control mode - pressure measurement screen with a graph
• mA/VDC Mode - mA/v dc measurements screen
• HART Mode - HART connection screen.
Use the Main menu to access functions and other menus. Refer to Tables 3, 4, and
5 for information about each Main screen item.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...