Loading ...
Loading ...
Loading ...
V
WWW.SIGLENT.COM
distribution boards and equipment permanently connected to fixed installations.
ï‚Ÿ CAT III:
Used for measurements installed in buildings, such as junction boxes, circuit breakers,
distribution boards and equipment that are permanently connected to fixed
installations.
ï‚Ÿ CAT IV:
It is used for measuring at the source of low-voltage devices, such as electricity meters
and primary overcurrent protection devices.
SHS800X Measurement Category
SHS800X can working under the measurement category listed in the table below, The
applicable measurement category of a combination of a probe assembly and an
accessory is the lower of the measurement category.
SHS800X
Max Input Voltage
Scope（BNC input）
CAT II 300Vrms Between BNC Signal and
Protecting Earth.
CAT II 30Vrms Between BNC GND and
Protecting Earth.
CAT II 300Vrms Between BNC Signal and
BNC GND.
Scope（Probe input）
CAT II 300Vrms Between Signal and
Protecting Earth.
CAT II 30Vrms Between Probe GND and
Protecting Earth.
CAT II 300Vrms Between Probe Signal
and Probe GND.
Loading ...
Loading ...
Loading ...