Hikvision DS-K1T321MFX User Manual

Loading ...

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Door Open Timeout Alarm

An alarm will be triggered if the door has not been closed within the congured me duraon.

Door Contact

You can set the door contact as Remain Open or Remain Closed according to your actual needs.

By default, it is Remain Closed.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Unlock Password

The specic person can open the door by inpung the unlock password.

Note

The duress code and the super code should be dierent. And the digit ranges from 4 to 8.

Terminal Parameters

You can set terminal parameters for accessing.

Tap → Access Control → Terminal Parameters .

You can set Working Mode as Access Control Mode. The access control mode is the device normal

mode. You should authencate your credenal for accessing.

Tap Save to save the sengs aer the conguraon.

Set Card Security

Tap → Access Control → Card Security to enter the conguraon page.

Set the parameters and tap Save.

Enable NFC Card

In order to prevent the mobile phone from geng the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 Card

DS-K1T321 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T321MFX Value Series Face Access Terminal