Hikvision DS-K1T321MFX User Manual

Loading ...

Select an authencaon mode according to your actual needs from the drop-down list.

Connuous Face Recognion Interval (s)

You can set the interval between 2 connuous recognion of a same person during the

authencaon. In the congured interval, Person A can only recognized once. If another

person (Person B) has recognized during the interval, Person A can recognized again.

Authencaon Interval

You can set the authencaon interval of the same person when authencang. The same

person can only authencate once in the congured interval. A second authencaon will be

failed.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Main Interface Mode

You can set the Main Interface Mode as Authencaon Mode or Simple.

Communicaon with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Max. Interval When Entering Password

When you entering the password on the card reader, if the interval between pressing two

digits is longer than the set value, the digits you pressed before will be cleared automacally.

OK LED Polarity/Error LED Polarity

Set OK LED Polarity/Error LED Polarity of the access control device according to the card

reader parameters. Generally, adopts the default sengs.

Enable Tampering Detecon

Enable the an-tamper detecon for the card reader.

Enable Card No. Reversing

The card No. will be in reverse sequence aer enabling the funcon.

Set Door Parameters

Tap → Access Control → Door Parameters .

DS-K1T321 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T321MFX Value Series Face Access Terminal