Loading ...
Loading ...
Safety
This generator is a Safety Class I instrument according to IEC classification and has been
designed to meet the requirements of EN61010-1:2001 (Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use). It is an Installation
Category II instrument intended for operation from a normal single phase supply.
This instrument has been tested in accordance with EN61010-1, CSA 22.2 No.
61010-1-
04 and UL 61010A-1 and has been supplied in a safe condition. This instruction manual
contains some information and warnings which have to be followed by the user to ensure
safe operation and to retain the instrument in a safe condition.
This instrument has been designed for indoor use in a
Pollution Degree 2 environment in
the temperature range 5 °C to 40 °C, 20 % - 80 % RH (non-condensing). It may
occasionally be subjected to temperatures between +5 °C and -10 °C without degradation
of its safety. Do not operate the instrument while condensation is present.
Use of this instrument in a manner not specified by these instructions may impair the
safety
protection provided. Do not operate the instrument outside its rated supply
voltages or environmental range.
Warning
To avoid the possibility of electric shock:
• This instrument must be earthed.
• An
y interruption of the mains earth conductor inside or
outside the instrument will make the instrument
dangerous. Intentional interruption is prohibited. The
protective action must not be negated by the use of an
extension cord without a protective conductor.
• When the instrument is connected to its suppl
y, terminals
may be live and opening the covers or removal of parts
(except those to which access can be gained by hand) is
likely to expose live parts.
• Disconnect the instrument from all voltage sources before
opening it for an
y adjustment, replacement, maintenance
or repair.
• An
y adjustment, maintenance and repair of the opened
instrument under voltage shall be avoided as far as
possible and, if inevitable, shall be carried out only by a
skilled person who is aware of the hazard involved.
• Make sure that onl
y fuses with the required rated current
and of the specified type are used for replacement. The use
of makeshift fuses and the short-circuiting of fuse holders
is prohibited.
Caution
If the instrument is clearly defective, has been subject to
mechanical damage, excessive m
oisture or chemical corrosion
the safety protection may be impaired and the apparatus should
be withdrawn from use and returned for checking and repair.
i
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...