Loading ...
Loading ...
Loading ...
Remote Operation
Remote Command Summary17
17-27
TONEFREQ <nrf1>,<nrf2>,
<nrf3>
Set tone frequency number <nrf1> to
<nrf2> Hz. The third parameter sets the tone
type; 1 will give trig, 2 will give FSK, any
other value gives gate type.
TRIGIN <cpd> Set the trig input to <INT
>, <EXT>,
<MAN>, <PREV>, <NEXT>, <POS> or
<NEG>.
TRIGLEV <nrf> Set the trigger threshold level to <nrf>
volts.
TRIGOUT <cpd> Set the trig output to <AU
TO>, <WFMEND>,
<POSNMKR>, <SEQSYNC> or
<BSTDONE>.
TRIGPER <nrf> Set the internal trigger generator period to
<nrf>
sec.
USBID? Returns the instruments address.
VCAIN <cpd> Set the vca/sum input to <VCA>
, <SUM> or
<OFF>.
WAVE <cpd>
Select the output waveform as <SINE>
,
<SQUARE>, <TRIANG>, <DC>,
<POSRMP>, <NEGRMP>, <COSINE>,
<HAVSIN>, <HAVCOS>, <SINC>,
<PULSE>, <PULSTRN>, <NOISE> or
<SEQ>.
WAVFREQ <nrf> Set the waveform frequency to <nrf> Hz.
WAVPER <nrf> Set the waveform period to <nrf>
sec.
WFMCLKSRC <cpd> Set the playback clock source of the selected
wavefor
m to <INT> or <EXT>.
ZLOAD <cpd> Set the output load, which the generator is to
assu
me for amplitude and dc offset entries, to
<50> (50Ω), <600> (600Ω) or <OPEN>.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...