Loading ...
Loading ...
Loading ...
Remote Operation
Remote commands17
17-21
Miscellaneous Commands
*
LRN? Returns the complete set up of the instrument as
a hexadecimal character data block. To re-install
the set up the block should be returned to the
instrument exactly as it is received.
The syntax of the response is LRN
<Character data><rmt>
.
The settings in the instrument are not affected by
execution of the
*
LRN? command.
LRN <character data> Install data for a previous
*
LRN? command.
*
RST Resets the instrument parameters to their default
values (see Appendix).
*
RCL <cpd> Recalls the instrument set up contained in store
<cpd>. There must be a memory card
containing a set-up file named <cpd> in the
instrument. Recalling store named "?" sets all
parameters to the default settings (see
Appendix).
*
SAV <cpd> Saves the complete instrument set up to the set-
up file named <cpd>. There must be a
memory card with space for the set-up file in the
instrument.
*
TRG This command is the same as pressing the
MAN TRIG key. Its effect will depend on the
context in which it is assert
ed. The interface
command Group Execute Trigger (GET) will
perform the same action as
*
TRG.
COPYCHAN <nrf> Copy the parameters from the current set-up
channel to channel <nrf>
.
HOLD <cpd> Set hold mode <ON>
, <OFF>, <ENAB> or
<DISAB>. The ON or OFF forms are the
same as pressing the MAN HOLD key. The
ENAB
and DISAB forms are channel specific
and enable or disable the action of the
MAN HOL
D key or HOLD input.
FILTER <cpd> Set the output filter to <AUTO>
, <ELIP>,
<BESS> or <NONE>.
SYSCLKFRQ <nrf> Set the frequency of the system clock to
<nrf>
Hz
SYSCLKSRC <cpd> Set the source of the system clock to <INT>
or
<EXT>.
BEEPMODE <cpd> Set beep mode to <ON>
, <OFF>, <WARN>, or
<ERROR>.
BEEP Sound one beep.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...