Loading ...
Loading ...
Loading ...
291, 292, 294
Users Manual
17-26
PULTRNWID <nrf1>,<nrf2> Set the width of pulse−train pulse number
<nrf1> to <nrf2> sec.
QER? Query and clear query error number register.
REFCLK <cpd> Set the REF CLOCK IN/OUT to <IN
>,
<OUT>, <MASTER> or <SLAVE>.
SCMLEVEL <nrf> Set the level for SCM to <
nrf> Volts.
SETUPCH <nrf> Select channel <nrf>
SEQCNT <nrf1>,<nrf2> Set count for sequence segment <nrf
1> to
<nrf2>.
SEQSEG <nrf>,<cpd> Set the status of sequence segment <nrf> to
<ON>
or <OFF>.
SEQSTEP <nrf>,<cpd> Set the ‘step on’ parameter for sequence
seg
ment <nrf> to <COUNT>,
<TRGEDGE> or <TRGLEV>.
SEQWFM <nrf>,<cpd> Set the ‘waveform’ parameter for sequence
seg
ment <nrf> to <cpd>.
SUM <cpd> Set the sum source to <OFF>
, <EXT> or
<PREV>.
SUMRATIO <nrf> Set the sum ratio to <nrf
>.
SWPCENTFRQ <nrf> Set the sweep centre frequency to <nrf
> Hz.
SWPDIRN <cpd> Set the sweep direction to <UP>
, <DOWN>,
<DNUP> or <UPDN>.
SWPMKR <nrf> Set the sweep marker to <nrf> Hz.
SWPSPACING <cpd> Set the sweep spacing to <
LIN> or <LOG>.
SWPSPAN <nrf> Set the sweep frequency span to <nrf>
Hz.
SWPSTARTFRQ <nrf> Set the sweep start frequency to <nrf
> Hz.
SWPSTOPFRQ <nrf> Set the sweep stop frequency to
<nrf
> Hz.
SWPSYNC <cpd> Set the sweep sync <ON>
or <OFF>.
SWPTIME <nrf> Set the sweep time to <nrf>
sec.
SWPTYPE <cpd> Set the sweep type to <CO
NT>, <TRIG> or
<THLDRST> .
SYNCOUT <cpd> Set the sync output <ON>
, <OFF>, <AUTO>,
<WFMSYNC>, <POSNMKR>, <BSTDONE>,
<SEQSYNC>, <TRIGGER>, <SWPSYNC>
or <PHASLOC>.
SYSCLKFRQ <nrf> Set the frequency of the system clock to
<nrf>
Hz.
SYSCLKSRC <cpd> Set the source of the system clock to <INT>
or <EXT>
.
TONEEND <nrf> Delete tone frequency number <nrf>
thus
defining the end of the list.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...