Hikvision DS-2CD2346G2-IU\/G Hikvision Network Camera User Manual

Loading ...

Note

For stable use of Wi-Fi, it is not recommended to use DHCP.

Go to Wi-Fi sengs page: Conguraon → Network → Advanced Conguraon → Wi-Fi .

Set and save the parameters.

1) Click Search.

2) Select a SSID, which should be the same as that of wireless router or AP.

The parameters of the network is automacally shown in Wi-Fi.

3) Select the Network Mode as Manage.

4) Input the key to connect the wireless network. The key should be that of the wireless network

connecon you set on the router.

What to do next

Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP , and click

Wlan to check the IPv4 Address and log in the device.

7.10 Set Network Service

You can control the ON/OFF status of certain protocol as desired.

Steps

Note

This funcon varies according to dierent models.

Go to Conguraon → Network → Advanced Sengs → Network Service .

Set network service.

WebSocket & WebSockets

WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its

above version or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live

view, image capture, digital zoom, etc. cannot be used.

If the device uses HTTP, enable WebSocket.

If the device uses HTTPS, enable WebSockets.

When you use WebSockets, select the Server Cercate.

Note

Complete cercate management before selecng server cercate. Refer to Cercate

Management for detailed informaon.

SDK Service & Enhanced SDK Service

Check Enable SDK Service to add the device to the client soware with SDK protocol.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2346G2-IU\/G DS-2CD2346G2-IU/G 4MP AcuSense Fixed IR Turret Network Camera With Built-In Microphone Grey