Loading ...
Loading ...
Loading ...
Chapter 10 Allocate VCA Resource
VCA resource oers you opons to enable certain VCA funcons according to actual needs. It helps
allocate more resources to the desired funcons.
Steps
1.
Go to Conguraon → System → System Sengs → VCA Resource .
2.
Select desired VCA funcon.
3.
Save the seîž«ngs.
Note
Some VCA funcons are mutually exclusive. When certain funcon or funcons are selected and
saved, others will not be hidden.
10.1 Road Trac
Motor vehicle, non-motor vehicle, and pedestrian can be detected and captured when they enter
the set lane to realize rapid detecon and comprehensive surveillance of the targets on road.
Note
Only certain device models support this funcon.
10.1.1 Set Vehicle Detecon
The vehicle that enters the set lane can be detected and the picture of the vehicle and its license
plate can be captured and stored. Alarm will be triggered and capture can be uploaded.
Before You Start
Go to Conguraon → System → System Sengs → VCA Resources , and select Road Trac.
Steps
1.
Go to Conguraon → Road Trac → Detecon Conguraon , and select Vehicle Detecon as
detecon type.
2.
Check Enable.
3.
Select the lane number.
4.
Click and drag the lane line to set its posion, or click and drag the line end to adjust the length
and angle of the line.
5.
Adjust the zoom rao of the camera so that the size of the vehicle in the image is close to that of
the red frame. Only the posion of red frame is adjustable.
Network Camera User Manual
87
Loading ...
Loading ...
Loading ...