Hikvision DS-2CD2346G2-IU\/G Hikvision Network Camera User Manual

Loading ...

Note

Only 1 license plate can be captured at one me for each lane.

Select Region and Country/Region.

Select the license plate informaon upload mode.

Entrance/Exit The license plate informaon of the detected vehicle will be uploaded when

the vehicle passes the detecon area and triggers the detecon in entrance/

exit.

City Street The license plate informaon of the detected vehicle will be uploaded when

the vehicle passes the detecon area and triggers the detecon in city

streets.

Alarm Input It means the input alarm will trigger a license plate capture and recognion

acon.

Note

●

When Alarm Input is selected, the alarm input A<-1 will automacally be assigned to trigger

vehicle detecon and its alarm type is always NO.

●

If the A<-1 alarm input is used to trigger vehicle detecon, it can not be used for other basic

events.

●

When Alarm Input is selected and saved, previously congured linkage method for A<-1 will

be canceled.

Select the Detecon mode.

Check Remove Duplicated License Plates ans set the Time Interval. The default me interval is 4

minutes.

Note

Up to 8 license plates are supported.

10.

Set arming schedule and linkage method. For the arming schedule sengs, refer to Set Arming

Schedule . For the linkage method sengs, refer to Linkage Method Sengs .

11.

Click Save.

10.1.2 Set Mixed-Trac Detecon Rule

The motor vehicle, non-motor vehicle, and pedestrian that enter the set lane can be detected, and

the picture of targets can be captured and stored. Alarm will be triggered and capture can be

uploaded.

Before You Start

Go to Conguraon → System → System Sengs → VCA Resources , and select Road Trac.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2346G2-IU\/G DS-2CD2346G2-IU/G 4MP AcuSense Fixed IR Turret Network Camera With Built-In Microphone Grey