Loading ...
Loading ...
Loading ...
6.1.6 Set Video Quality Diagnosis
When the video quality of the device is abnormal and the alarm linkage is set, the alarm will be
triggered automacally.
Steps
1.
Go to Conguraon → Event → Basic Event → Video Quality Diagnosis .
2.
Select Diagnosis Type.
3.
Set the corresponding parameters.
Alarm Detecon Interval
The me interval to detect the excepon.
Sensivity
The higher the value is, the more easily the excepon will be detected, and the higher
possibility of misinformaon would be.
Alarm Delay Times
The device uploads the alarm when the alarm reaches the set number of mes.
4.
Check Enable, and the selected diagnosis type will be detected.
5.
Set arming schedule. See Set Arming Schedule .
6.
Set linkage method. See Linkage Method Seîž«ngs .
7.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
6.1.7 Set Vibraon Detecon
It is used to detect whether the device is vibrang. The device reports an alarm and triggers linkage
acons if the funcon is enabled.
Steps
1.
Go to Conguraon → Event → Basic Event → Vibraon Detecon .
2.
Check Enable.
3.
Drag the slider to set the detecon sensivity. You can also enter number to set the sensivity.
4.
Set the arming schedule. See Set Arming Schedule .
5.
Set the linkage method. See Linkage Method Seîž«ngs .
6.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
Network Camera User Manual
42
Loading ...
Loading ...
Loading ...