Hikvision DS-2CD2346G2-IU\/G Hikvision Network Camera User Manual

Loading ...

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

6.2.11 Set Object Removal Detecon

It detects whether the objects are removed from the pre-dened detecon region, such as the

exhibits on display. If it occurs, the device can take linkage acons and the sta can take measures

to reduce property loss.

Steps

Go to Conguraon → Event → Smart Event → Object Removal Detecon .

Check Enable.

Select a Region. For the region sengs, see Draw Area .

Set the rule.

Sensivity It stands for the percentage of the body part of an acceptable target that leaves

the pre-dened region.

Sensivity = 100 – S1/ST*100

S1 stands for the target body part that leaves the pre-dened region. ST stands

for the complete target body.

Example: If you set the value as 60, a target is possible to be counted as a

removed object only when 40 percent body part of the target leaves the region.

Threshold The threshold for the me of the objects removed from the region. If you set the

value as 10, alarm is triggered aer the object disappears from the region for

10s.

Oponal: Repeat the above steps to set more regions.

For the arming schedule sengs, see

Set Arming Schedule . For the linkage method sengs, see

Linkage Method Sengs .

Click Save.

Note

The funcon is only supported by certain models. The actual display varies with the models.

6.2.12 Draw Area

This secon introduces the conguraon of area.

Steps

Click Draw Area.

Click on the live view to draw the boundaries of the detecon region, and right click to complete

drawing.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2346G2-IU\/G DS-2CD2346G2-IU/G 4MP AcuSense Fixed IR Turret Network Camera With Built-In Microphone Grey