Loading ...
Loading ...
Loading ...
6.2.2 Set Defocus Detecon
The blurred image caused by lens defocus can be detected. If it occurs, the device can take linkage
acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Defocus Detecon .
2.
Check Enable.
3.
Set Sensivity. The higher the value is, the more easily the defocus image can trigger the alarm.
You can adjust the value according to the actual environment.
4.
For the linkage method seîž«ngs, refer to Linkage Method Seîž«ngs .
5.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
6.2.3 Detect Scene Change
Scene change detecon funcon detects the change of surveillance scene. Some certain acons
can be taken when the alarm is triggered.
Steps
1.
Go to Conguraon → Event → Smart Event → Scene Change Detecon .
2.
Click Enable.
3.
Set the Sensivity. The higher the value is, the more easily the change of scene can be detected.
But the detecon accuracy is reduced.
4.
Refer to
Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seîž«ng linkage method.
5.
Click Save.
Note
The funcon varies according to dierent models.
6.2.4 Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkage acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Face Detecon .
2.
Check Enable Face Detecon.
3.
Oponal: Highlight to display the face in the image.
1) Check Enable Dynamic Analysis For Face Detecon.
Network Camera User Manual
44
Loading ...
Loading ...
Loading ...