Loading ...
Loading ...
Loading ...
1662/1663/1664 FC
Users Manual
2
Safety
See Table 1 for a list of symbols used on the Product and in this manual.
A Warning identifies hazardous conditions and procedures that are
dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to
the Product or the equipment under test.
XW Warnings
To prevent possible electrical shock, fire, or personal injury:
• Use the Product only as specified, or the protection
supplied by the Product can be compromised.
• Carefully read all instructions.
• Read all safety information before you use the Product.
• Do not use the Product around explosive gas, vapor, or
in damp or wet environments.
• Comply with local and national safety codes. Use
personal protective equipment (approved rubber gloves,
face protection, and flame-resistant clothes) to prevent
shock and arc blast injury where hazardous live
conductors are exposed.
• Do not use the Product in distribution systems with
voltages >550 V.
• Use Product-approved measurement category (CAT),
voltage, and amperage rated accessories (probes, test
leads, and adapters) for all measurements.
• The battery door must be closed and locked before you
operate the Product.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
• Do not use test leads if they are damaged. Examine the
test leads for damaged insulation and measure a known
voltage.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...