Loading ...
Loading ...
Loading ...
Electrical Installation Tester
Mainte nance
71
XW Warning
To prevent possible electrical shock, fire, or personal injury:
• Remove the test leads and any input signals before you
replace the battery.
• Install ONLY specified replacement fuses with the amperage,
voltage, and speed ratings shown in the Specifications
section of this manual.
To replace the batteries (see Figure 17):
1. Press to turn off the Tester.
2. Remove the test leads from the terminals.
3. To remove the battery door, use a standard-blade screwdriver to turn the
battery door screws (3) one-quarter turn counterclockwise.
4. Press the release latch and slide the battery holder out of the Tester.
5. Replace the batteries.
6. Replace the battery holder and the battery door.
7. Turn the battery door screws one-quarter turn clockwise to fasten the door.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...