Dji RS 4 User Manual

Loading ...

DJI RS 4 / RS 4 Pro

User Manual

Setting up Gimbal Bluetooth

Swipe down from the top of the touchscreen on the Home screen to enter the Control Center

screen. Tap the Bluetooth icon in the upper right corner. The gimbal will scan the Bluetooth

signals of the surrounding devices. Select the corresponding camera Bluetooth to connect.

Some cameras require a password for pairing. The Bluetooth icon turns blue indicating

connection is successful.

• The gimbal can only connect to one camera at a time.

Notice

1. After connecting the camera to the gimbal for the rst time, reboot the camera and gimbal,

and then the Bluetooth shutter can automatically reconnect. Some cameras need the user

to short press the gimbal camera control button to reconnect automatically after reboot.

2. Reconnect to the camera Bluetooth after rmware update.

3. Check the Ronin Series Compatibility list for detailed information on the control functions

supported by the Bluetooth.

Connect to the Camera using Camera Control Cable

Use the camera control cable to connect the RSS camera control port of the gimbal to the USB

port of the camera.

Check the Ronin Series Compatibility list for detailed information on cables used by the camera

and the functions they can perform.

Auto Tune

Auto tune provides the proper stiness for the motor according to the payload to obtain the

optimum gimbal performance. Follow the steps below to start automatic calibration.

1. Press and hold the power button for two seconds to power on the gimbal and the three axes

will unlock and expand automatically.

2. Press and hold the M button and trigger to start automatic calibration.

• Place the gimbal on a steady at surface. DO NOT move the gimbal during automatic

calibration. It is normal for the gimbal to shake or make sounds during the calibration.

Loading ...

Dji RS 4