Dji RS 4 User Manual

Loading ...

DJI RS 4 / RS 4 Pro

User Manual

Balancing

Balance the vertical tilt, the depth for the tilt axis, the roll axis and the pan axis in sequence

according to the shooting requirements before using the gimbal. This ensures the stability of

videos and the full performance of the gimbal.

• The balance of DJI RS 4 and DJI RS 4 Pro is adjusted in the same way. DJI RS 4 is used as

an example below.

• An unbalanced gimbal may affect the stability of videos and reduce the battery life.

Severe imbalance may cause the device to overheat and go into hibernation.

Before Balancing

1. Before balancing, make sure to power on the camera if using an optical zoom lens and to

select the focal length if using a varifocal lens.

2. Make sure DJI RS 4 / DJI RS 4 Pro is powered o or in sleep mode before balancing.

Balancing in Horizontal Shooting

1. balancing the Vertical Tilt

a. Unlock the tilt axis .

b. Follow the figure below (top view) and rotate the tilt axis so that the camera lens is

pointing upward. Check to make sure the camera is not top or bottom-heavy. If top-

heavy, move the camera backward. If bottom-heavy, move the camera forward. Loosen

the mounting plate knob and move the mounting plate back and forth to adjust the

center of gravity.

c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is

balanced when the camera is steady while pointing upward.

Loading ...

Dji RS 4