Hikvision DS-K1T671TMFW User Manual

Loading ...

7.12.1 Call Client Soware from Device

Steps

Get the client soware from the supplied disk or the ocial website, and install the soware

according to the prompts.

Run the client soware and the control panel of the soware pops up.

Click Device Management to enter the Device Management interface.

Add the device to the client soware.

Note

For details about adding device, see Add Device.

Call the client soware.

1) Tap on the device inial page.

2) Enter 0 in the pop-up window.

3) Tap to call the client soware.

Tap Answer on the pop-up page of the client soware and you can start two-way audio between

the device and the client soware.

Note

If the device is added to mulple client sowares and when the device is calling the client

soware, only the rst client soware added the device will pop up the call receiving window.

7.12.2 Call Center from Device

Steps

Get the client soware from the supplied disk or the ocial website, and install the soware

according to the prompts.

Run the client soware and the control panel of the soware pops up.

Click Device Management to enter the Device Management interface.

Add the main staon and the device to the client soware.

Note

For details about adding device, see Add Device.

Set the main staon's IP address and SIP address in the remote conguraon page.

Note

For details about the operaon, see the user manual of the main staon.

Call the center.

If you have congured to call center in the

Basic Sengs , you can tap to call the center.

If you have not congured to call center in the

Basic Sengs , you should tap → to call

the center

Answers the call via the main staon and starts two-way audio.

DS-K1T671 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T671TMFW Ultra Face Recognition Terminals