Hikvision DS-K1T671TMFW User Manual

Loading ...

Chapter 3 Installaon

3.1 Installaon Environment

●

Avoid backlight, direct sunlight, and indirect sunlight.

●

For beer face recognion, there should be light source in or near the installaon environment.

●

Sunlight, wind, hot/cool air from air condioner and other external factors, which may aect

temperature, will create the deviaon of the temperature measurement. In order to get an

accurate result, make sure the device is applied indoors and windlessly (where is relavely

isolated from the outdoors). The working temperature should keep between 10 °C and 35 °C. If

there are no suitable environments for temperature measurement (the area faces the indoor

and connects the outdoor, the area at the door of the indoor environment, etc.), building a

temporary temperature measurement environment is suggested.

●

Inuence Factors of Temperature Measurement:

Wind: The wind will take the heat away, which may aect the measurement result.

Sweat: The sweat will take the heat away, which may aect the measurement result.

Air Condioner (Cool Air): If the indoor temperature is low, the temperature may also lower than

the actual temperature, which may aect the measurement result.

Air Condioner (Heat) or Heang: If the indoor temperature is high, the temperature may also

be higher than the actual temperature, which may aect the measurement result.

●

In order to make the device work properly, you should wait for 90 min aer the device is

powered on.

●

For details about installaon environment, see Tips for Installaon Environment .

3.2 Install with Gang Box

Steps

According to the datum line on the mounng template, sck the mounng template on the wall

or other surface, 1.4 meters higher than the ground.

DS-K1T671 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T671TMFW Ultra Face Recognition Terminals