Hikvision DS-K1T671TMFW User Manual

Loading ...

You can set the door lock status when the door lock is powering o. By default, it is Remain

Closed.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Door Remain Open Duraon with First Person

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows

mulple persons access the door or other authencaon acons.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Super Password

The specic person can open the door by inpung the super password.

Note

The duress code and the super code should be dierent.

Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral, address, baud rate, etc.

Click Conguraon → Access Control → RS-485 Sengs .

Check Enable RS-485, and set the parameters.

Click Save to save the sengs aer the conguraon.

No.

Set the RS-485 No.

Peripheral Type

Select a peripheral from the drop-down list according the actual situaon. You can select from

Card Reader, Extension Module, Access Controller, or Disable.

Note

Aer the peripheral is changed and saved, the device will reboot automacally.

RS-485 Address

Set the RS-485 Address according to your actual needs.

DS-K1T671 Series Face Recognion Terminal User Manual

100

Loading ...

Hikvision DS-K1T671TMFW Ultra Face Recognition Terminals