Loading ...
Loading ...
Loading ...
8
1. Installation and Connection
1.1 Getting Started
Before installing your device, thoroughly familiarize yourself with the information in the installation section of this manual.
NOTES
Pelco recommends connecting the device to a network that uses Dynamic Host Configuration Protocol (DHCP)
server to address devices.
To ensure secure access, place the device behind a firewall when it is connected to a network.
Ensure power source used is 48VDC, 24VAC or IEEE 802.3at (Indoor), IEEE 802.bt (Environmental)
NOTE:
The product is intended to be supplied by a Listed Power Unit marked "L.P.S." (or "Limited Power Source")
and rated output:
24Vac, 50/60Hz, 2A, 48Vdc, 1A or PoE BT 1A (Environmental)
24Vac, 50/60Hz, 1.4A, 48Vdc, 0.77A or PoE AT 0.5A(Indoor)
The product shall be installed by a qualified service person and the installation shall conform to all local
codes.
If a Class I adapter or switch is used to provided power, be sure that the power cord is firmly plugged into
the socket and confirm the main earth connection.
Loading ...
Loading ...
Loading ...