Loading ...
Loading ...
Loading ...
16
1. Click the System tab.
2. Click the Restore All Camera Defaults button to restore the camera’s factory default settings.
NOTE: If the camera is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the IP address settings
for the camera will be lost and the server will not recognize the camera. DHCP On is the default setting for the camera IP
address.
2.2.1.1 General Settings
FIGURE 2-7: GENERAL SETTINGS
General Settings
Change the Device Name by following steps:
1. Click the Device Name box and highlight the text.
2. Type a user-friendly name into the Device Name box (2 to 64 characters). A user-friendly name makes it easier to
recognize the device on the network. Examples of user-friendly names are Front Door, Lobby, or Parking Lot.
3. Click Save to save the new device name, or click Reset to restore to the previously saved device name.
Loading ...
Loading ...
Loading ...