Loading ...
Loading ...
Loading ...
18
2.2.1.2 Backup & Restore
FIGURE 2-8: BACKUP AND RESTORE SETTINGS
Backup
Once the camera settings have been configured for optimal scene display, use the backup feature to save the camera settings.
Restore
If the camera settings are changed and inadvertently result in a less desirable image, use the restore setting to restore the
camera to the previously saved settings.
NOTE: This feature is not intended for the configuration of multiple units or for firmware upgrades.
2.2.1.3 Firmware
FIGURE 2-9: SYSTEM INFORMATION AND FIRMWARE UPDATE SETTINGS
System Information
The System Information page fields are read-only and include the firmware version, hardware version, model number, and
serial number of the system are revealed here as below figure. This information is typically required by Pelco Product Support
for troubleshooting purposes.
Firmware Update
Users can update system firmware if available. Ensure a user has been created before updating camera’s firmware. All camera
motions will shut down during firmware update. Please close any other screens before firmware update. Never disconnect
power or LAN cable during the firmware update process. It takes approximately 3 minutes for the unit to reboot after firmware
update process. Again, power can’t be lost when updating firmware since it will cause the update failure and manufacturer
maintenance will be required.
Loading ...
Loading ...
Loading ...