Loading ...
Loading ...
Loading ...
70
FIGURE 2-59: FTP UPLOAD HANDLER
FTP Upload Handler
You can record and send event image files based on the condition you have set previously.
1. Check to enable FTP Upload Handler for Alarm 1 through 4, Motions 1 through 4, Sabotage Detection,
Schedule, Audio Detection, Object Counting, as well as Loitering Detection.
2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without
saving it.
Remote Server
Remote Server is used as a service component to transfer files by simply entering the IP address or hostname with the Login
ID and password.
1. IP Address: Input a server name or address.
2. Port: Set “21” as default or change to dedicated number.
3. Username: Input a user name with privilege to access the server.
4. Password: Input the password associated with Username.
NOTE: The default Username and Password are “guest” and “1234”.
Settings
1. Set Pre-event Snapshots, Post-event Snapshots, Pre-event Snapshot Interval, and Post-event Snapshot
Interval for Alarm, Motions 1 through 4, Sabotage Detection, Schedule, Audio Detection, Object Counting,
and Loitering Detection selected.
2. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without
saving it.
Snapshot Naming
By setting File Name Prefix and Server Path for Alarm, Motions 1 through 4, Sabotage Detection, Schedule, Audio
Detection, Object Counting, as well as Loitering Detection selected, you will be able to save an image to a defined FTP
server when any of your selected events is activated. Set the Server Path where the data is to be stored on the server.
Loading ...
Loading ...
Loading ...