Loading ...
Loading ...
Loading ...
30
1. Select V3 as the SNMP Version.
2. Type the SNMP user name in the SNMP User field.
3. Select the encryption algorithm for authentication from the Authentication drop-down menu: None, MD5, or SHA. If
you use authentication method MD5 or SHA, type a password in the text box to the right of the selected
Authentication encryption.
4. Select the privacy encryption algorithm setting from the Privacy drop-down menu: None, DES, or AES. If you use
privacy method DES or AES, type a password in the text box to the right of the selected Privacy encryption.
5. Configure the address for the Trap Configuration. The Address is the host name or IP address of the recipient of
the trap message.
6. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without
saving it.
NOTE: SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can
be active at a time.
2.2.2.7 Firewall
Set the Firewall function. A firewall is a system or group of systems that manages access between two networks.
FIGURE 2-23: FIREWALL CONFIGURATION
Firewall
1. Select Allow or Deny mode to enable this function. The default setting is Off.
2. Check Enable to enter IP Address in the Address field. Up to ten addresses can be enabled for entry.
3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without
saving it.
2.2.2.8 FTP
This page will enable or disable FTP access to this camera. In this page, users can activate a FTP Server to access the SD
card for recordings. Enabled the FTP and use this function.
Loading ...
Loading ...
Loading ...