Loading ...
Loading ...
Loading ...
26
Optional: A signed TLS certificate must be installed, but a secure URL that begins with the protocol name “https:” is
optional when accessing the camera. You can also access the camera using a standard URL with the “http:” protocol, but
sensitive data is not encrypted during transmission. To ensure that sensitive data is encrypted, you must use a secure
URL with the “https:” protocol.
Disabled (default): Turns off access to the Web client through TLS. Sensitive data will not be encrypted during
transmission.
NOTE: If the TLS mode is set to disabled, you cannot access the camera using a URL that begins with an “https:” protocol.
Your Web browser displays an error message if you do not type the camera URL correctly.
Refer to the following sections for more information:
• Generating Self-Signed Certificate
• Generating Certificate Request
Certificate
Generating Self-Signed Certificate
1. Click the Install New Certificate button located at the bottom of the TLS Configuration page. The Select Certificate
Install Method option buttons appear on the page.
FIGURE 2-16: SELECT CERTIFICATE INSTALL METHOD OPTION
2. Select the “Generate Self-signed Certificate” option, and then click Next. The “Self-signed Certificate
Information Form” opens.
FIGURE 2-17: GENERATING SELF-SIGNED CERTIFICATE CONFIGURATION
3. Fill in all of the fields, and then click Generate Certificate. The following progress message appears on the page:
“Loading data…” After a while, the certificate is uploaded to the device.
4. After the certificate is uploaded, select the desired mode.
5. Click Save.
NOTE: Self-signed certificates are valid for one year. The certificate’s expiration date is listed in the Installed Certificate
information section. If the certificate has expired and you attempt to access the camera using a secure URL, the Web
Loading ...
Loading ...
Loading ...