Loading ...
Loading ...
Loading ...
Sarix® Modular Camera Operations Manual
C6719M | 02/22
8
Configuring the System Settings
Use the System tab to configuring General Settings, Firmware, Storage Management, and Diagnostics.
Configuring General Settings
The General Settings page allows you to set the camera's identity.
Caution:The Sarix Modular Camera has multiple camera heads in a single camera. Some settings
apply to the camera as a whole; other settings apply to individual heads. Certain multi-head camera
settings can be set globally for all of the heads. Other settings must be set for each individual head.
When configuring a camera, configure both the global and the individual head settings.
Note: Features and options are disabled if they are not supported by the camera.
1. Click the System tab, and then click the General Settings tab.
2. In the Name field, give the camera a meaningful General name. (Optional)Give each head a
meaningful name.
3. In the Location field, describe the camera's General location. (Optional)Give each head a
meaningful location.
4. From the Mode drop-down menu, select the mode in which the camera will operate. This option is
only applicable for select cameras.
l Full Feature — This is the standard operating mode that offers the full functionality of the
camera.
l High Framerate — This mode will use the maximum image rate possible but will disable
sabotage detection on the Sarix Modular camera. Sabotage detection is available in full feature
mode.
5. Select the Disable device status LEDs check box to disable the camera LED indicators.
6. Select any of the Overlay Settings check boxes to display and stamp that information on the
camera's video stream. The options are:
l Display Date—Selecting the Display Date check box also enables the Date Format drop-down
menu. From the list, choose the date format.
l Display Time
l Display GMT Offset
l Display Name
l Display Location
7. In the Time Settings area, select how the camera keeps time.
l To manually set the camera’s date and time, enter the time zone on this page.
l Select the Automatically adjust clock for Daylight Savings Time check box, if required.
l To auto-synchronize the camera’s date and time with an NTP server, configure the NTP server
on the Network and Security tab, Network page. See the section titled Configuring the Network
Loading ...
Loading ...
Loading ...