Loading ...
Loading ...
Loading ...
Sarix® Modular Camera Operations Manual
C6719M | 02/22
26
1. Click the A/V Streams tab, and then click the VideoConfigurations button.
2. View the auto-generated URIs in the RTSP Stream URI area:
l Unicast — Use this URI to view the video stream from one video player at a time.
l Multicast — Use this URI to view the video from more than one video player simultaneously.
3. To view the RTSP stream:
a. Copy and paste the appropriate URI into your video player. DO NOT open the live video
stream yet.
b. Add your username and password to the beginning of the address in this format:
rtsp://<username>:<password>@<generated RTSP Stream URI>/
For example: rtsp://admin:admin@192.168.1.79/defaultPrimary?streamType=u
c. Open the live video stream.
Accessing the Still Image URI
On the A/V Streams tab, VideoConfigurations page, you can access the last still image frame that the
camera recorded.
1. Click the A/V Streams tab, and then click the VideoConfigurations button.
2. In the Still Image URI area, click the link.
l The last recorded frame of video from the camera’s secondary stream is displayed.
l You can save or print the image directly from the browser.
Audio
Use the settings on the Audio Configurations page to adjust the audio quality of the Video Intercom.
For encoding the audio stream, you can choose from the Opus sound encoder, which produces high-quality
sound, or the G.711 protocol sound encoder. Use the Opus encoder if you are using a video management
system that supports the Opus protocol. Otherwise use the widely supported G.711 protocol.
Echo cancellation and noise reduction are built into the Video Intercom. Echo cancellation removes the
speaker output signal from the microphone signal, which prevents the operator at the other end from
hearing an echo of their own voice. Noise reduction removes background noise from the microphone signal,
and you can set the sensitivity to background noise. You can also set the speaker volume and the
microphone output levels.
1. In the Audio Configuration section, in the Encoding field, specify the audio encoder to use:
l Opus:High quality audio codec is available if required.
l G.711: This default setting is supported on various platforms.
2. In the Device Speaker section, use the Volume slider to adjust the volume on the speaker (from 0 to
100).
3. In the Device Microphone section, use the Line In Gain slider to adjust the gain for any line-level
audio input that is connected to the audio input connector on the I/O terminal block.
4. Click Apply to save the settings.
Loading ...
Loading ...
Loading ...