Loading ...
Loading ...
Loading ...
Sarix® Modular Camera Operations Manual
C6719M | 02/22
13
To change the prefix length, enter the preferred IPv6 address using Classless Inter-Domain
Routing (CIDR) notation. For example, 2001:db8::1/32 would indicate the address prefix
is 32-bits long.
By default, the prefix length is set to /64.
Note
: The configured prefix length might not display correctly in the web interface, but
the prefix used by the camera will be the configured length.
d. In the Default Gateway field, type the default gateway you prefer to use. You can only assign a
default gateway if RA is disabled.
The IPv6 addresses that can be used to access the camera are listed under the Current IPv6
Addresses area.
5. To customize the hostname, enter it in the Network Hostname field.
6. In the DNS Lookup area, select how the camera will obtain a Domain Name System (DNS) server
address.
l Click to select the checkbox for Obtain DNS server address automatically to automatically find
a DNS server.
l Click to select the checkbox for Use the following DNS server addresses to manually set DNS
server addresses. You can set up to three addresses:
– In the Preferred DNS server field, type the address of the preferred DNS server.
– (Optional)In the Alternate DNS server 1 field, type the address of an alternate DNS server.
If the preferred server is not available, the camera will attempt to connect to this server.
– (Optional)In the Alternate DNS server 2field, type the address of another alternate DNS
server. If both the preferred server and the first alternate server are unavailable, the camera
will attempt to connect to this server.
7. In the Port Settings area, specify which control ports are used to access the camera. You can enter
any port number between 1 and 65534. The default port numbers are:
l HTTP Port: 80
l HTTPS Port: 443
l RTSP Port: 554
l RTSP Replay Port: 555
To limit camera access to secure connections only, click to deselect the checkbox for Enable HTTP
connections. HTTP Port access is enabled by default.
8. In the NTP Server area, select the checkbox for how the server is configured—DHCPor Manual. If
you select Manual, type the server address in the NTPServer field.
9. In the MTU area, set the Maximum Transmission Unit (MTU) size in bytes. Type a number in the
MTU size field that is within the available range displayed on the right. Lower the MTU size if your
network connection is slow.
10. In the Ethernet Settings area, click to select an option from the Speed & Duplex drop-down menu.
The Auto-negotiation (default) setting is the preferred setting for most cameras, and will negotiate
the optimal speed and duplex setting for your network connection.
11. In the Security area, click to select from the drop-down menu the Minimum TLS version that the
camera should to encrypt the communication between camera and server, and to block older TLS
Loading ...
Loading ...
Loading ...