Loading ...
Loading ...
Loading ...
Sarix® Modular Camera Operations Manual
C6719M | 02/22
21
areas. The image processing combines the two images to form one view, incorporating the best
detail and clarity across the entire scene.
If you enable both BLC and WDR, the camera will deliver the detail you will see in WDR-only mode, but will
ignore optimization on the very brightest (or darkest) portions of the image.
Adjusting White Balance Settings
Note: Features and options are disabled if they are not supported by the camera.
1. Click the Imaging tab, and then click the White Balance button.
2. For each head, click Head [#] to select the head.
a.a. View the following information:
l Current Exposure
l Current Gain
l Last Known Light Level
3. Select All Heads, and then adjust the video image as required.
You can either use a preset configuration, or you can create your own custom configuration. Use the
Preset drop-down menu to select the preferred configuration:
a. Pelco: This preset provides the recommended balance of brightness and color for video
surveillance.
b. Standard: This preset is configured for general day/night changes in an indoor or outdoor
scene.
c. Vivid: This preset provides increased color and brightness for a more saturated image.
d. Custom: Select this option to manually adjust the following image settings:
Note
: The
Brightness
and
Contrast
settings are disabled if you selected
Enable Wide
Dynamic Range
. See the section titled
Configuring General Imaging Settings
l Saturation: You can adjust the video’s color saturation by entering a percentage number.
0 creates a black and white image, while 100 creates intense color images.
l Sharpness: You can adjust the video’s sharpness by entering a percentage number.
0 applies the least amount of sharpening, while 100 applies the most sharpening to make
the edges of objects more visible.
l Brightness: You can adjust the video’s brightness by entering a percentage number.
0 creates a dark image, while 100 creates a light-filled image.
l Contrast: You can adjust the video’s contrast by entering a percentage number.
0 applies the least amount of contrast, while 100 applies the most contrast between
objects in the image.
Note
:You can select any preset, and make changes to the image settings. When you
apply the changes, the updated image settings are saved and the preset will change to
Custom
.
e. Move the Temporal Filter Strength slider slightly to the left or right to adjust the amount of noise
vs. blur in the scene. This reduces image noise by averaging the noise over several frames.
Loading ...
Loading ...
Loading ...