Loading ...
Loading ...
Loading ...
76
Saturation: Adjusts the saturation of the image.
Sharpness: Adjusts the sharpness of the image.
Gamma: Adjusts the relative proportions of bright and dark areas.
White balance: The camera automatically adjusts the color to be closest to the image
you are viewing. You can choose one of the three presets: Indoor, Fluorescent, and
Outdoor. You can also choose Manual to adjust the white balance manually.
Color Temperature: Adjust the camera image to have a warmer or cooler color tone.
Note this function is available for GV-FER5700 / 5701 and GV-EFER3700 Series, and
only appears when you choose Manual for White Balance.
Tint: Move the slider to remove undesired color cast for a more neutral color. Note this
function is only available for GV-FER5700 / 5701 and GV-EFER3700 Series, and only
appears when you choose Manual for White Balance.
Flicker less: The camera automatically matches the frequency of your camera’s imager
to the frequency of indoor light sources, e.g. fluorescent lighting. You can also select 50
Hz or 60 Hz manually. If these don’t match, faint light and dark bars may appear in your
images. Check the power utility to determine which frequency is used.
Note: For GV-FER5700 / 5701, GV-EFER3700 / EFER3700-W, the function of Flicker is
listed in Video Signal Type, 4.1.1 Video Settings.
Image Orientation: Changes the image orientation on the Live View window.
Slowest Shutter Speed: Shutter speed controls the amount of the lights enters the
image sensor and directly impacts the quality of image presentation. Under low light
conditions, a faster shutter speed will lower color quality and image clarity. A slow
shutter speed allows more light to enter and creates a brighter overall image, but moving
objects may appear blurry. You can manually select a shutter speed, select Auto for
automatic shutter speed, or select Auto (Higher Shutter Speed) for faster automatic
shutter control.
D/N: Sets the Day/Night mode of the camera. Select Auto for automatic switch between
day mode and night mode depending on the amount of light detected. Select Black and
white to switch the camera to night mode. Select Color to switch the camera to day
mode. Sets the light sensor’s sensitivity of switching between day mode and night mode.
The value 10 is the most light-sensitive. Select Trigger by Input to switch between day
mode and night mode once the input device (e.g. sensor or button) is triggered. For
details, see D/N, Special View Settings, 4.1.1 Video Settings.
Loading ...
Loading ...
Loading ...