Loading ...
Loading ...
Loading ...
Administrator Mode
145
4
Keep days (1-254): Select the number of days to keep the files from 1 day to 254 days.
When both Keep days and Enable recycling are selected, the system applies
whichever condition comes first. For example, if the specified smallest amount of
storage space comes earlier than the designated keep days, then recycle is applied
first.
Enable debug message to the storage: Debug message (see 4.8.4 Log Information)
is deleted after reboot. Select this option to store log information to the attached
storage device.
Enable auto formatting when disk or partition is enable to record: Select this
option for the camera to automatically format the storage device when there is error
during recording.
[Network Neighborhood Settings]
You can record your GV-Fisheye Camera to a connected NAS server.
Note:
1. GV-FER5700 / 5701 / 12203 and GV-EFER3700 Series do not support connection with
NAS servers.
2. Make sure your camera’s video settings adhere to the following:
VBR is set to Good
Maximal Bit Rate is set to the following:
Camera Type Max. Bit Rate
1.3 MP 6 Mbit or lower
2 MP / 3 MP / 4 MP / 5 MP 8 Mbit or lower
3. For optimal performance and compatibility, it is highly recommended to use a GV-NAS
System.
4. It is highly recommended that the NAS server supports quota function, and a separate
quota is allocated to each camera.
5. This NAS recording function is only supported for GV-IP Camera (firmware V3.0 or later).
6. GV-IP Camera does not support recording to shared folders of a Windows-based server.
Loading ...
Loading ...
Loading ...