Loading ...
Loading ...
Loading ...
50
1.7.2 GV-FE3402 / 3403 / 5302 / 5303
Figure 1-59
1. Remove the camera cover with the supplied torx wrench.
2. Supply power and network to the camera with one of the following methods:
A. Power adapter: plug in the power adapter and connect a standard network work
cable.
B. Power over Ethernet (PoE): connect the camera to a PoE switch with a standard
network cable to supply power and network.
C. PoE Converter: this method is only applicable to indoor GV-Fisheye Camera
installed with an IR LED ring (GV-FE3403 / 5303). A PoE converter allows the
camera to be connected to a PoE switch (thus supplied with network and power
over a network cable), and also supplies power to IR LED ring. For installation
steps, see 1.7.4 Connecting PoE Converter and IR LED Ring for GV-FE3403 /
5303.
3. Optionally insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).
4. Optionally connect an external speaker.
5. Optionally connect a GV-WiFi Adapter (for WiFi accessibility) or an external USB hard
drive (for additional storage).
6. Secure the camera cover with the supplied torx wrench.
Note: For details on the limitations and requirements of mini USB port, refer to Note for
USB Storage and WiFi Adapter at the beginning of this manual.
Loading ...
Loading ...
Loading ...