Loading ...
Loading ...
Loading ...
36
5. Secure the back plate onto the ceiling board with the 2 screws provided. If you want to
thread the camera cables through the ceiling board, you can cut a cable opening as
shown below. Make sure to cut the cable opening slightly larger than the RJ-45 plug of
the camera cable.
Figure 1-28
6. Open the camera cover by unscrewing the indicated screws.
Figure 1-29
7. Secure the camera to the back plate by tightening the 3 screws as shown below. The
cables can be threaded through the cable opening on the side or through the ceiling
board.
Figure 1-30
Loading ...
Loading ...
Loading ...