Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/11192384-gv-fer5701/bga6.png)
152
Chapter 5 Recording and Playback
The camera can record video and audio directly to the memory card. You can play back the
recorded files on the GV-DVR / NVR / VMS or over the TCP/IP network.
Note: See Note for Recording at the beginning of the manual.
5.1 Recording
To enable the recording function:
1. Insert the memory card to the camera. See “To add a memory card,”
4.8.3 Storage
Settings.
2. If you want to set up pre-recording, post-recording or audio recording, see 4.1.1 Video
Settings.
3. If you want to set up the schedule for video recording or I/O monitoring, see 4.5
Recording Schedule.
4. If you want to configure the areas and sensitivity values for motion detection, see 4.1.2
Motion Detection.
5. If you want the recording to be triggered by input device, configure the operation of I/O
devices. See 4.2.1 Input Settings.
6. To start recording and I/O monitoring, see 4.4 Monitoring.
The camera will start recording upon motion detection, I/O trigger, or during the scheduled
time.
Loading ...
Loading ...
Loading ...