Loading ...
Loading ...
Loading ...
140
4.7.6 IP Filtering
The Administrator can set up IP filtering to restrict access to the camera.
Figure 4-31
To enable the IP Filter function:
1. Enable IP Filtering: Enable the IP Filter function.
2. Web Service Access Policy: Select Allow access from anywhere (Default) or Allow
access from local LAN / Disallow access from anywhere.
3. Web CGI SDK Auth Policy: Select Low (Default) or High, which enhances data
transmission security. This function is for customers with the need to develop their own
SDK, and is only supported by GV-FER5700 / 5701 and GV-EFER3700 Series.
4. Click Apply.
Note: If you select Disallow access from anywhere, before clicking Apply, remember to
set one IP address for which access to the camera is allowed.
5. Filtered IP: Type one IP address or a range of IP addresses you want to restrict the
access.
6. Action to take: Select the action of Allow or Deny to be taken for the IP address(es)
you have specified.
7. Click Apply.
Loading ...
Loading ...
Loading ...