Loading ...
Loading ...
Loading ...
12
13
*
ACCUMULATED TIMING
Example
1 Start: start timing
2 Stop: e.g., 15 min. 5 sec. following
1
.
3 Restart: timing is resumed
4 *Stop: e.g., 13 min. 5 sec. following
3
.
The accumulated time = 28 min. 10 sec.
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
4
, the accumulation of the timing can be
continued by pressing push-button
A (Restart/Stop, Restart/Stop,…)
INTERMEDIATE OR INTERVAL TIMING
Example
1 Start: start timing.
2 Display interval:
e.g., 10 min. 10 sec. following
1
.
Timing continues in the background.
3 Making up the measured time:
the two chronograph hands are quickly
advanced to the ongoing measured time.
4 Stop: e.g., 28 min. 10 sec. following
1
.
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
3
, further intervals or intermediates can be
displayed by pressing
B (display interval / make up measured time, …)
1
5
2
3
4
A
B
2
3
5
B
1
4
A
CHRONOGRAPH MODEL 5030.D
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
I
(= normal position).
- the three chronograph hands are
precisely at zero position following
activation of push-button
B. If the hands
are not precisely at zero, their positions
must be adjusted. (See the chapter
Adjusting the Chronograph Hands to Zero
.)
SETTING THE TIME
1 Pull out the crown to position III.
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back to position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I.
4 If setting the date between 9:00 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.
A
Second hand
Date
Center stop-second
Minute hand
Hour hand
Minute counter
Hour counter
B
III
1
2
3
II IIII
3
1
2
I
Loading ...
Loading ...
Loading ...