Loading ...
Loading ...
Loading ...
40
41
SETTING THE DATE (QUICK MODE)
Unscrew the crown to release it into first position.
Pull out the crown to position II (watch still running).
Turn the crown counterclockwise until the
required date appears.
Push the crown back into position
I.
If setting the date between 9:00 p.m. and 3:00 a.m.,
follow steps 1 through 3, but be sure to set the date
to the following day.
Remember to reseal the crown. To do so, press it against the
case until the threads engage. Then turn it clockwise until tight.
III
3
1
2
WINDING WHILE STOPPED
Turn the crown counterclockwise until it releases
into position
I
.
Turn the crown clockwise 30-35 times to restore
the full power reserve.
Reseal the crown by pressing it against the case
and turning it slightly clockwise until it locks back
in position zero.
30x - 35x
SETTING THE TIME
Unscrew the crown to release it into first position.
Pull out the crown to position III (the watch stopped).
Turn the crown counterclockwise until the current time
is shown (remember the 24-hour cycle).
Push the crown back into position
I.
Remember to reseal the crown.
To do so, press it against the case until the threads
engage. Then turn it clockwise until tight.
II IIII
3
1
2
BASIC FUNCTION ( START / STOP / RESET )
Example
Start: Press push-button
A
.
Stop: To stop the timing, press push-button
A
once
more and read the two chronograph counters:
e.g. 4 min. / 38 sec.
Zero positioning: Press push-button
B
.
(The two chronograph hands will be
reset to their zero positions.)
1
2
3
A
B
Loading ...
Loading ...
Loading ...