Dreame DRE-L10P L10 Prime Robotic Vacuum and Mop

User Manual - Page 6

For DRE-L10P.

PDF File Manual, 81 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
7 8
ENEN
Note: Install the side brush until it clicks into place.
Note: It is recommended to fully charge the robot before its first use. When
the robot cannot be turned on after the battery is depleted, manually connect
the robot with the station to charge it.
1. Remove the Protective Strips and Install the Accessories 3. Place the Robot
Pressandholdthebuttonontherobotfor3secondstoturniton.Place
therobotontothebasestationwiththemopassemblyfacingtowardthe
washboard.Thenyouwillhearavoicenoti󽗉cationwhentherobotsuccessfully
connectstothebasestationandstartscharging.
4. Add Water to the Clean Water Tank
Takeoutthecleanwatertankfromthebasestation,and󽗉llitwithcleanwater
uptothemaxwaterline.Theninstallitbackintothebasestation.
PlacethebasestationinalocationthatisasopenaspossiblewithagoodWi-Fi
signal.Insertthepowercordintothebasestationandplugitintothesocket.
2. Set up the Base Station
Before Use
Note:
·
Make sure that no objects might block the signaling area.
·
To prevent water stains from damaging wood floors or carpets, it is
recommended to place the base station on tile or marble floors.
Note:
·
Do not fill the water tank with hot water as this may cause the water tank to warp.
·
Do not add any liquid other than the officially-approved cleaning solution to
help prevent base station malfunction.
>1,5 m
>5 cm
>5 cm
>1 m
Firmly insert the power
cord upwards until the
indicator turns on.
Side Brush Clip
Protective Strip
Mop Assembly
- MAX -
MAX Water Line
Base Station
Product Overview
Washboard
Upper Cover
Used Water Tank Clean Water Tank
Water Tank Clip
Water
Tank Clip
Float Ball
Water Pipe
Filter
Used Water Tank Clean Water Tank
Floater
Status Indicator
· Solid white:
The base station is connected
to power
· Blinking Orange:
The base station has an error
Signaling Area
Charging Contacts
Loading ...
Loading ...
Loading ...