Loading ...
Loading ...
Loading ...
Waveform Generator
DSO8000E Series HandHeld Oscilloscope User Manual 77
EXT Trig: Turn on or turn off external trigger, rise edge or fall eage.
Generate the AM/FM waveform
To output an AM/FM Wave, please do the following Steps:
1. Press F1 button to select "AM/FM Wave".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Depth: Set the output wave Depth.
Type: Change the output wave "AM" into "FM"
Max Freq: Set the output wave Max Frequency.
FM: Change the output wave "AM" into "FM".
Sync Out: Turn on or turn off synchronous output.
OutPut: Select waveform output type, Continuous, single or trun off.
EXT Trig: Turn on or turn off external trigger, rise edge or fall eage.
9.2 Edit Arb waveform
User can't edit arbitrary waveform directly under DDS interface for the device. Please use
DDS_ARB software to generate a waveform file and load it again.
1. Connect the device to computer by USB. Right click “My Computer-> Device Manger” to install
the driver.
2. Please double click “Setup.exe” in DDS_ARB folder and install DDS_ARB software according
to installation wizard. After DDS_ARB software installed successfully, you can see DDS_ARB
icon on desktop. Double-click the icon, user can select "Wave Parameter - > Arb" to edit
arbitrary waveform.
You can download DDS_ARB software from website.
http://www.hantek.com/en/ProductDetail_1_159.html
Loading ...
Loading ...
Loading ...