Loading ...
Loading ...
Loading ...
Waveform Generator
DSO8000E Series HandHeld Oscilloscope User Manual 76
Generate the Square waveform
To output a Square Wave, please do the following Step:
1. Press F1 button to select "Square".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Duty: The duty of the output wave.
Sync Out: Turn on or turn off synchronous output.
OutPut: Select waveform output type, Continuous, single or trun off.
EXT Trig: Turn on or turn off external trigger, rise edge or fall eage.
Generate the Trapezia waveform
To output a Trapezia wave, please do the following steps:
1. Press F2 button to select "Trap".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Duty: The duty of the output wave.
Rise Duty: Set the output wave rise duty.
High Duty: Set the output wave high duty.
Fall Duty: Set the output wave fall duty.
Sync Out: Turn on or turn off synchronous output.
OutPut: Select waveform output type, Continuous, single or trun off.
EXT Trig: Turn on or turn off external trigger, rise edge or fall eage.
Generate the Exponent waveform
To output an Exponent Waveform, please do the following steps:
1. Press F1 button to select the wave "Exp".
2. Set the Wave Parameters:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Phase: Set the output wave phase.
Time: Set the ouput wave Tao param.
Exp Type: Set the output wave slope.
Sync Out: Turn on or turn off synchronous output.
OutPut: Select waveform output type, Continuous, single or trun off.
Loading ...
Loading ...
Loading ...