Loading ...
Loading ...
Loading ...
26
Rohde & Schwarz has a comprehensive probe portfolio to meet every probing need.
► For more information, see "Probes and accessories for Rohde & Schwarz oscilloscopes"
(PD 3606.8866.12).
Standard passive probes
(38MHz to 700MHz)
R&S®RT-ZP11, R&S®RT-ZP1x
Passive probes are standard accessories for
Rohde & Schwarz oscilloscopes. They are low-cost,
general purpose probing solutions for a broad range
of applications.
Passive broadband probes
(8GHz)
R&S®RT-ZZ80
These are an economical yet powerful alternative
to active probes for measuring high speed signals
on low impedance lines. Their input impedance is
low and remains practically constant over the entire
frequency range. They feature extremely low input
capacitance, very low noise and high linearity.
Active single-ended broadband probes
(1GHz to 6GHz)
R&S®RT-ZS10L, R&S®RT-ZS10E, R&S®RT-ZS10,
R&S®RT-ZS20, R&S®RT-ZS30, R&S®RT-ZS60
Very wide dynamic range, exceptionally low off-
set and gain errors combined with the right acces-
sories make these probes the ideal accessory for
Rohde & Schwarz oscilloscopes.
EMC near-field probes
(30MHz to 3GHz)
R&S®HZ-15, R&S®HZ-17
Powerful E and H near-field probes for the fre-
quency range from 30MHz to 3GHz with an
optional preamplifier expand the application range
of the R&S®MXO4 series oscilloscope to include
EMI debugging.
Current probes
(20kHz to 120MHz; ±1 mA to 2000 A)
R&S®RT-ZC02, R&S®RT-ZC03, R&S®RT-ZC05B,
R&S®RT-ZC10, R&S®RT-ZC10B, R&S®RT-ZC15B,
R&S®RT-ZC20, R&S®RT-ZC20B, R&S®RT-ZC030,
R&S®RT-ZC31
Rohde & Schwarz current probes enable accurate,
non-intrusive measurement of DC and AC currents.
Different models are available to measure currents
in the range from 1mA to 2000 A with a maximum
bandwidth of up to 120MHz. Current probes are
available with the Rohde & Schwarz probe interface
or BNC with external power supply.
High voltage probes
(100MHz to 400MHz; ±750V to ±6000V)
R&S®RT-ZH03, R&S®RT-ZH10, R&S®RT-ZH11,
R&S®RT-ZD01, R&S®RT-ZHD07, R&S®RT-ZHD15,
R&S®RT-ZHD16, R&S®RT-ZHD60
The Rohde & Schwarz portfolio of high voltage
probes includes passive single-ended and active
differential probes for voltages up to 6000V (peak).
Different models allow measurements in up to
CATIV environments. Differential probes provide
an exceptional common mode rejection ratio over a
broad frequency range.
Power rail probes
(2GHz and 4GHz)
R&S®RT-ZPR20, R&S®RT-ZPR40
Wide bandwidth, high sensitivity, very low noise
and extra-large offset compensation make the
R&S®RT-ZPR power rail probes an excellent tool for
characterizing power rails. An integrated high accu-
racy DC voltmeter provides instantaneous DC volt-
age readout.
Active differential broadband probes
(1GHz to 4.5GHz)
R&S®RT-ZD10, R&S®RT-ZD20, R&S®RT-ZD30,
R&S®RT-ZD40
The flat frequency response and high input imped-
ance with low input capacitance permit precise
measurements on differential signals while keeping
the DUT load low. The high common mode rejec-
tion over the entire probe bandwidth ensures high
immunity to interference. Special browser adapters
allow flexible contacting with high signal fidelity.
R&S®RT-ZA15 external
attenuator for
R&S®RT-ZD20/-ZD30
R&S®RT-ZD40: browser adapters
to easily vary the pin offset
Loading ...
Loading ...
Loading ...