Loading ...
Loading ...
Loading ...
Cleaning and care of the oven
98
Most soiling can be easily removed
using a clean, soft sponge and a mild
solution of warm water and liquid dish
soap.
Depending on how dirty the oven was
prior to cleaning, there may be a
visible layer of soiling across the inner
glass pane on the door. You can
remove this using the scouring side of
a dish sponge, a glass scraper, or with
a stainless-steel spiral pad and liquid
dish soap.
There is a fiberglass seal around the
oven compartment which seals the
inside of the glass oven door and
can be damaged by rubbing and
scouring.
Avoid cleaning the fiberglass seal.
The fiberglass seal is essential for
sealing the door properly.
Spilled fruit juices may cause lasting
discoloration of enameled surfaces.
This discoloration is permanent but
will not affect the properties of the
enamel.
Do not attempt to remove these
marks.
Extending and retracting the FlexiClip
telescopic runners
After cleaning, discoloration or light
patches may remain on the FlexiClip
telescopic runners. This will not affect
the function of the runners in any way.
Extend and retract the FlexiClip
telescopic runners several times after
running the Self Clean program.
Self Clean interrupted
If the Self Clean program is cancelled,
the oven door will remain locked until
the temperature inside the oven drops
to below 535°F (280°C).
The following events will cause the Self
Clean program to stop:
- Turning the oven off.
If you turn the oven off, Self clean
program cancelled will appear on the
display.
- A power failure.
Once the power returns after a power
failure, Self clean program cancelled will
appear on the display.
The door will unlock once the
temperature in the oven has dropped
below 535°F (280°C), and the oven is
turned off.
Loading ...
Loading ...
Loading ...